YOUR SOURCE FOR AEROSPACE AND AVIATION CONSUMABLES
M-AWR Aircraft Degreaser
Biodegradable Aircraft Cleaner & Degreaser
Powerful surface cleaning. Designed for soil separation and degreasing.
Ready-to-use, biodegradable aircraft cleaner and degreaser for light to medium cleaning of aircraft, aerospace equipment, aerospace ground equipment (AGE) and AGE engines.
An aqueous, water-dilutable cleaning compound designed as an alternative to cleaners containing toxic or environmentally harmful ingredients. Supplied ready to use; no dilution is required. MIL-PRF-87937 Type II is intended for light to medium cleaning and is not intended to remove heavy soils. Follow applicable maintenance, safety and environmental requirements.
01Technical profile
| Product form | Ready to use |
|---|---|
| Formula | Aqueous solution |
| pH | 7–9 |
| VOC | 0% |
| Flash point | None |
| Fragrance | Unscented |
| Color | None |
| Biodegradable | Yes |
| Country | USA |
02Approvals & specifications
03Applications
04Formulation properties
05Product formats
06Available packaging
| Part number | Packaging | National Stock Number / Specification |
|---|---|---|
| M-AWR-32 | 32 oz bottle | MIL-PRF-87937D Type II |
| M-AWR-326 | Case of 6 × 32 oz | MIL-PRF-87937D Type II |
| M-AWR-1 | 1 US gallon | NSN 6850-01-390-7827 |
| M-AWR-14 | Case of 4 × 1 US gallon | NSN 6850-01-390-7827 |
| M-AWR-5 | 5-gallon drum (18.9 L) | NSN 6850-01-339-5227 |
| M-AWR-5B | 5-gallon bucket (18.9 L) | NSN 6850-01-339-5227 |
| M-AWR-55 | 55-gallon drum (208 L) | NSN 6850-01-390-7828 |
| M-AWR-275 | 275-gallon tote · RFQ required | MIL-PRF-87937D Type II |
| Other sizes | RFQ required | MIL-PRF-87937D Type II |
NSNs shown as supplied by MERYT. Other sizes and tote configurations require a request for quotation (RFQ).
07Directions for use
Read the SDS before use. Follow the applicable aircraft, component and equipment maintenance procedures.
Ultrasonic cleaning
Use in ultrasonic systems for light to medium soils, oils and greases. Submerge parts and select cleaning time according to contamination and the applicable maintenance procedure.
Parts washers
Use for deep cleaning. A grease filter can prolong solution life by limiting contaminant recirculation. Nylon parts brushes and agitation can improve cleaning efficiency.
Spray application on metals
Apply to compatible metal surfaces and allow a 5–10 minute dwell where permitted by the applicable maintenance procedure. Use compatible brushes or pads and follow the required wash and rinse process.
Spray & wipe
Apply directly to the surface and wipe with a clean cloth. Heating is not required for effective cleaning.
Soaking for grease removal
For light to medium contamination, use soak times of 2, 5 or 10 minutes. Follow with compatible brushing or scrubbing as permitted by the maintenance procedure. Type II is not intended to remove heavy soils.
Pressure cleaning booth
Apply to parts and allow a 5–10 minute dwell before high-pressure water cleaning, hot or cold. Follow applicable maintenance requirements for rinsing.
Cleaning & polishing
Apply directly and work with a clean polishing pad or soft cloth, by hand or with a rotary/orbital device. Wipe clean and dry with a lint-free cloth. Confirm the method is suitable for the surface.
Residence time
Allow sufficient contact time within the limits of the applicable maintenance procedure. Type II is intended for light to medium cleaning.
08Handling & product information
Important product notice
IMPORTANT: Before using any MERYT LLC product, users must read and fully understand the information contained in the corresponding Safety Data Sheet (SDS). All safety guidelines, handling instructions, and personal protective measures outlined therein must be strictly followed. MERYT LLC provides the information in this document in good faith but makes no warranties, express or implied, regarding the accuracy, completeness, or suitability of the data for any specific application. Users are solely responsible for determining the appropriateness of the product for their intended use, as conditions of use, application methods, and regulatory environments may vary by location and change over time. This product is intended for commercial and industrial applications only, as specified by MERYT LLC, and should not be used in any manner that violates third-party intellectual property rights, applicable laws, or regulatory standards, or that adversely affects human health or the environment. MERYT LLC shall not be held liable for any direct, indirect, incidental, or consequential damages resulting from the use, misuse, or inability to use this product. It is the user’s responsibility to conduct their own evaluation and ensure compliance with all applicable laws and operational requirements. NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE MADE, except as explicitly stated in a signed sales agreement or purchase order confirmation. USE OF THIS PRODUCT IS AT THE USER’S OWN RISK.
